Brand
RWM
TradeMark
45 Series
Wheel Diameter (in.)
6
Wheel Width (in)
2
Overall Height (in.)
7 1/2
Rigid or Swivel
Swivel
Capacity (lb.)
900
Product Details
Cold formed top plate, yoke, and button are all heat treated to prevent brinelling, improve swivel action and increase service life. Load and thrust bearings are hardened and ground and rotate on hardened raceways. Top plate and legs are 1/4” steel. Legs are formed for increased strength and continuously welded to yoke. All swivel sections are equipped with a lubrication fitting for field maintenance.
• Kingpin - 5/8” diameter rivet hydraulically compressed to increase strength of swivel section as compared to staking
• Axle - 1/2” diameter drilled axle with lubrication fitting provided on all casters to improve ease of lubrication
• Wheel types: Durastan, cast iron, performance TPR, polyolefin, rubber-on-iron, urethane-on-iron, and urethane-on-plastic
• Finish - Zinc plated to protect against corrosion
• Mounting plate size - 4” x 4-1/2” x 1/4”
• Mounting bolt diameter - 3/8”
• Bolt hole spacing - 2-5/8” x 3-5/8”, slotted to 3” x 3”
• Wheel diameters available from 4” through 8”
• Kingpin - 5/8” diameter rivet hydraulically compressed to increase strength of swivel section as compared to staking
• Axle - 1/2” diameter drilled axle with lubrication fitting provided on all casters to improve ease of lubrication
• Wheel types: Durastan, cast iron, performance TPR, polyolefin, rubber-on-iron, urethane-on-iron, and urethane-on-plastic
• Finish - Zinc plated to protect against corrosion
• Mounting plate size - 4” x 4-1/2” x 1/4”
• Mounting bolt diameter - 3/8”
• Bolt hole spacing - 2-5/8” x 3-5/8”, slotted to 3” x 3”
• Wheel diameters available from 4” through 8”