TradeMark
No. 260
Size (in.)
1
Product Details
These clevis pipe hangers are available in 18-8 stainless steel, black carbon steel, or galvanized carbon steel.
• Recommended for the suspension of stationary pipe lines
• Installation: Hanger load nut above clevis must be tightened securely to assure proper hanger performance. When an oversized clevis is used, a pipe spacer should be placed over the clevis bolt as a spacer to assure that the lower U-strap will not move in on the bolt
• Adjustment: Vertical adjustment without removing pipe may be made from 3/8” through 5-1/8”, varying with the size of clevis. Tighten upper nut after adjustment
Features:
• Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
• Sizes 5” and up have rod and two nuts instead of bolt and nut; thread length on clevis rod is such that the thread locks the nuts in place, and threads are not in shear plane
Approvals: Complies with Federal Specification A-A-1192A (Type 1), WW-H-171-E (Type 1) and MSS-SP-69 (Type 1) UL, FM and ULC Approved (Sizes 3/4” - 8”)
• Recommended for the suspension of stationary pipe lines
• Installation: Hanger load nut above clevis must be tightened securely to assure proper hanger performance. When an oversized clevis is used, a pipe spacer should be placed over the clevis bolt as a spacer to assure that the lower U-strap will not move in on the bolt
• Adjustment: Vertical adjustment without removing pipe may be made from 3/8” through 5-1/8”, varying with the size of clevis. Tighten upper nut after adjustment
Features:
• Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
• Sizes 5” and up have rod and two nuts instead of bolt and nut; thread length on clevis rod is such that the thread locks the nuts in place, and threads are not in shear plane
Approvals: Complies with Federal Specification A-A-1192A (Type 1), WW-H-171-E (Type 1) and MSS-SP-69 (Type 1) UL, FM and ULC Approved (Sizes 3/4” - 8”)